After adding the 'wg-client' configuration to WireGuard, a new connection will appear in the 'Tunnels' list. In the open WireGuard connection settings window from step 6, click on 'Import tunnel(s) from file' and select 'nf' on the Desktop, and click on 'Open'.Ĩ. Press the Ctrl+S key combination or select the 'File' - 'Save' menu.ħ. Usually, a 10-15 second interval between checks is sufficient. In the 'PersistentKeepalive' field, specify the frequency of attempts to verify the availability of the connection's remote side. In the 'Endpoint' field, enter the public IP address or domain name of the WireGuard server and the listening port on which the WireGuard client will set the connection.
In the 'Allowed IPs' field, enter the allowed IP addresses in IP/bitmask format - 172.16.82.1/32 (internal server address) and 192.168.22.0/24 (local segment address of the Keenetic router). In the 'PublicKey' field, insert the public key of the server, which can be copied to the clipboard from WireGuard settings in the web interface of the router: It is possible to use a different subnet, choosing it from the private address range and avoiding overlapping with other subnets configured on these devices. Set the IP address in the 'Address' field of the WireGuard client in IP/bitmask format - 172.16.82.6/24 (internal tunnel address).
#PRITUNL CONNECTION TIMED OUT WINDOWS#
In the 'PrivateKey' field of the, you have already entered the Windows WireGuard client key in step 4. PrivateKey = wAG52nyfQEEMOnt1W9Y4SdEOQB8XYaggenoUI6Thz3A= By default, the 'Persistent keepalive' value in peer settings is 30 seconds.Ħ. In the 'Persistent keepalive' field, specify the frequency of attempts to check the availability of the remote connection side. In the 'Allowed IPs' fields, specify the address from which traffic will be allowed to the server in IP/bitmask format - 172.16.82.6/32. NOTE: Important! Leave the WireGuard connection window open, do not close it. You can close the 'Create new tunnel' window, click 'Cancel'.
In the 'Public key' field of the web interface, insert the Windows WireGuard client key from step 1, which should be copied from the 'Public key' field to the clipboard. Enter the name of the tunnel 'wg-windows-client' in the opened form of the peer settings. Click on the previously created WireGuard connection ('WG-S') and then the 'Add Peer' button. Now, set up a remote connection on the previously configured WireGuard server side.Ĭonnect to the router's web interface and go to the 'Internet' - 'Other connections' menu. The copied WireGuard client private key must be inserted into the ready-made configuration from step 2 into the 'PrivateKey =' line.ĥ. Go back to the 'Create new tunnel' window of step 1 and copy the Windows WireGuard client private key to your computer clipboard from the 'PrivateKey =' field.Ĥ. You will see a ready-made configuration in which you will need to enter the settings for the Windows WireGuard client and the remote WireGuard server Keenetic. Open it in a text editor, for example, in Notepad++. NOTE: Important! Leave this window open, do not close it.Ģ. The configuration window for connection to the remote WireGuard server Keenetic - 'Create new tunnel' - will open. Launch the program and click on the down arrow next to 'Add Tunnel' in the lower-left corner.
#PRITUNL CONNECTION TIMED OUT INSTALL#
To connect to the Keenetic WireGuard server on a Windows-based computer, you must download and install the WireGuard program from the official website.ġ. If any of these conditions are not met, connecting to such a server from the Internet will be impossible.īelow is an example of connecting to a server from a Windows operating system, using Wind(19H2) as a reference. NOTE: Important! If you want to configure a Keenetic router as a VPN server, make sure that it has a public IP address and, when using the KeenDNS service, that it works in the 'Direct access' mode. The following instruction shows the process : ' Configuring a WireGuard VPN between two Keenetic routers'. Starting from KeeneticOS version 3.3, you can use WireGuard VPN to connect to the local network of the Keenetic router remotely.įirst, you need to configure the WireGuard server on the Keenetic device.
0 kommentar(er)
